Verification conditions
Coolant temperature should be 80-95°C.
Headlights, electric radiator fan and all electrical consumers must be turned off.
The gearbox must be in neutral.
On vehicles with power steering, the front wheels must be set to drive straight ahead.
Order of execution
1. Start the engine and let it run at idle speed.
2. Open the throttle to full link travel until the free lever comes into contact with the SAS-3.
3. Close the throttle to the SAS-2 contact and the free lever and at this point check the RPM.
4. If necessary, adjust the trigger by turning the SAS-3 screw.
5. Disengage the free lever and then check that the engine speed slowly returns to idle speed.