Contents: Removal ⇓ Installation ⇓
Note: For different configurations and markets, the location and number of fans may differ from that shown.
1. Expansion tank
2. Radiator
3. Radiator support bracket
4. Upper branch pipe
5. Lower branch pipe
6. Transmission Fluid Radiator Hoses
7. Fan
8. Fan shroud
9. Fan motor
Removal
1. Drain the coolant. To speed up the draining process, remove the radiator cap.
2. Disconnect the upper (1) and lower (2) radiator hoses. Disconnect the transmission fluid radiator hoses (3).
3. Disconnect the fan connectors (4 and 5).
4. Unscrew the mounting bolts (6 and 7) and remove the fans together with the casing. Tightening torque: 7-11 Nm.
5. Remove the upper radiator brackets (8 and 9) and remove the radiator from the engine compartment. Tightening torque: 7-11 Nm.
Installation
6. Installation is carried out in reverse order.
7. Fill the system with coolant