| Characteristic | Nominal value |
| Free play on the steering wheel rim | 30 mm |
| Steering wheel angle (inner wheel) | without power steering: 38°58'±1°30'
with power steering: 39°57'±1°30' |
| Steering wheel angle (outer wheel) | without power steering: 32°38'
with power steering: 32°54' |
| Moment of resistance to steering rod swing (inner joint) | 1.5-5.0 Nm |
| Moment of resistance to rotation of the steering rod end pin from rest | 0.5-2.5 Nm |
| Power steering pump working pressure | 40 kg/cm² |
| Pump drive belt deflection | 7-10 mm |
| Working fluid consumption at a pressure of 7 MPa (70 kg/cm²) | 9.6 cm³/rev |
| Working fluid consumption at a pressure of 8 MPa (80 kg/cm²) | 7.2 cm³/rev |
Tightening torques for threaded connections
| Threaded connection (fastener) | Tightening torque, Nm |
| Steering wheel nut | 40-50 |
| Steering column bracket mounting nut and bolt | 13-18 |
| Steering shaft and intermediate shaft joint bolt | 13-18 |
| Intermediate shaft and gear joint bolt | 13-18 |
| Tie rod end nut | 24-34 |
| Lower arm ball joint pin screw | 100-120 |
| Stabilizer and shock absorber strut nut | 35-45 |
| Bolt of the rear support of the power unit and subframe | 50-60 |
| Pressure pipe nut (steering gear side) | 12-18 |
| Hollow bolt of the discharge pipe (pump side) | 55-65 |
| Power steering return pipe nut (steering gear side) | 12-18 |
| Steering gear to subframe mounting screw | 55-65 |
The original can be read on the resource [hyundaibook]