Contents: Removal ⇓ Installation ⇓
1. Ball joint
2. Lower arm
3. Front silent block
4. Rear silent block
Removal
1. Remove the wheel. Tightening torque of the nuts: 90-110 Nm.
2. Loosen the screws (1) of the ball joint. Tightening torque: 100-120 Nm.
3. Loosen the screws (2) and remove the lower arm. Tightening torque: 100-120 Nm (rear bolt); 100-140 Nm (front bolt).
Installation
4. Installation is performed in the reverse order of removal.