Lower control arm of the front suspension (Hyundai Tucson LM)

Replacement

1. Remove the front wheel.

Note: Tightening torque: 88.3-107.9 Nm.

Caution: Be careful not to damage the hub studs when removing the front wheel.

2. Loosen the bolts and nuts and remove the lower arm (A).

Note: Tightening torque: 98.1-117.7 Nm

3. Remove the lower arm (A) and then loosen the bolts and nuts.

Note:

Tightening torque:

• Front: 98.1-117.7 Nm.
• Rear: 137.3-156.9 Nm.

4. Installation is carried out in reverse order.

Checking the technical condition

1. Check the bushing for wear and deformation.

The article is borrowed from an online resource (HyundaiBook.ru)

2. Inspect the lower control arm for bending or damage.

3. Inspect the lower arm for deformation.

4. Check all bolts and nuts.