Suspension, wheels and tires of the car Hyundai Tucson 2

General information about the suspension
Front suspension Rear suspension Wheels and tires

Front suspension — device
1. Subframe 2. Steering mechanism 3. Anti-roll bar 4. Lower arm 5. Front axle 6. Shock absorber strut assembly 7. Drive shaft 1. Dust cover 2. Upper mounting nuts 3....

Front strut assembly
Replacement 1. Remove the front wheel. Note: Tightening torque: 88.3 - 107.9 Nm. Caution: Be careful not to damage the hub studs when removing the front wheel. 2....

Lower control arm of the front suspension
Replacement 1. Remove the front wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the front wheel. 2. Loosen...

Front stabilizer bar
Replacement 1. Remove the front wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the front wheel. 2....

Front suspension cross beam
Replacement 1. Perform steps 1-10 of section " Replacing the front anti-roll bar " this chapter. 2. Remove the lower arm. 3. Remove the anti-roll bar. 4. Remove the...

Rear suspension — device
1. Subframe 2. Shock absorber 3. Spring 4. Upper arm 5. Trailing arm 6. Drive shaft 7. Differential housing

Rear suspension shock absorber
1. Self-locking nut 2. Bracket assembly 3. Bumper 4. Dust cover 5. Shock absorber Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3 - 107.9 Nm....

Upper arm rear suspension
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Remove the...

Lower arm rear suspension
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Loosen the...

Rear stabilizer bar
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Loosen the...

Rear additional lever
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Remove the...

Rear suspension trailing arm
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Loosen the...

Rear suspension cross beam
Replacement 1. Remove the rear wheel. Note: Tightening torque: 88.3-107.9 Nm. Caution: Be careful not to damage the hub studs when removing the rear wheel. 2. Remove the...

Wheels and tires
Tires Measuring the tread depth of a tire 1. Measure the tire tread depth. It should be at least 1.6 mm. 2. If the measured depth is less than the maximum allowable...

Tire pressure monitoring system
1. Receiver 2. Tire pressure monitoring system sensor 3. Tire pressure monitoring system sensor 4. Tire pressure monitoring system sensor 5. Tire pressure monitoring...

Specification

Tightening torques
Front suspension Rear suspension

Special tools and devices

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Chassis: Car suspension Hyundai Accent 1 (1994-1999)
Chassis: Car suspension Hyundai Elantra 3 (2000-2006)
Chassis: Suspension and wheels Hyundai Getz (2002-2011)
Chassis: Suspension and wheels Hyundai Santa Fe 2 (2007-2012, petrol)
Chassis: Suspension and wheels Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code