Hood Maintenance Hood opening 1. Pull the hood release handle to unlock the hood lock. The hood should open slightly. 2. Go to the front of the car, lift the hood, pull the hood lock...
Engine compartment Gas engine 1. Expansion tank for liquid of the cooling system. 2. Engine oil filler cap. 3. Brake/clutch fluid reservoir*. 4. Air filter. 5. Block of fuses. 6. Negative...
Complex of maintenance works When carrying out any maintenance or inspection work on the vehicle, the utmost care must be taken to avoid damage to the vehicle or personal injury. If there is any...
Maintenance performed by the owner of the vehicle The following are checklists of vehicle maintenance checks that should be performed at the specified intervals by the owner or an authorized Hyundai dealer to ensure...
A set of works on periodic maintenance Follow the regular maintenance schedule unless the vehicle is constantly operated in one of the modes listed below. If the vehicle is regularly operated in one of the...
Maintenance schedule for normal operation (for Europe) To ensure good engine performance and reduce emissions, the following maintenance must be performed. To avoid voiding the warranty, keep receipts from all emission...
Heavy-duty vehicle maintenance (for Europe) Below is a list of items that require more frequent maintenance under severe vehicle operating conditions. The table below shows the appropriate maintenance intervals....
Periodic Maintenance Items Engine oil and engine oil filter The engine oil and engine oil filter should be changed at the intervals specified in the maintenance schedule. When operating the car in...
Climate control air filter (if equipped) Filter Status The A/C air filter should be replaced according to the maintenance schedule. If the vehicle is driven in heavily polluted cities or on dusty, rough roads...
Wiper blades Checking the condition of the brushes Note. Hot industrial wax, which is applied in automatic car washes, is known to make windshield cleaning difficult. Contamination...
Labor protection when performing work on a car For safe and efficient repair work, use hand tools, power tools (only for disassembly) and recommended special attachments. Cover the fenders, upholstery and flooring...
Precautions when working on a vehicle Precautions to prevent vapor or gas poisoning Prolonged operation of the engine without proper exhaust gas extraction is prohibited. The working area must be well...
Basic set of necessary tools To carry out a quality car repair, you need to have a certain set of good tools. Below is a list of tools that are recommended for the owner of the car to carry out...
Methods of working with measuring instruments Flat stylus flat stylus (see picture) are a set of plates of a certain thickness with the appropriate marking, used to measure various gaps. Also, flat feelers can be...