Checking the engine oil level Park the vehicle on a level, level ground. Warm up the engine. Note. If the car has been parked for a long time, warm up the engine for approximately 20 minutes. Stop...
Engine oil change Attention! On vehicles equipped with engines with a catalytic converter, it is necessary to ensure that the oil level on the dipstick is not above the maximum mark. If...
Oil filter selection All Hyundai engines are equipped with a high quality disposable oil filter. This type of filter is recommended as a replacement filter for all vehicles. However, the...
Oil filter replacement Pic. 2.194. Oil filter Attention! Be careful not to burn yourself as the engine oil is hot. Using a special wrench, remove the engine oil filter. Pic. 2.195. Applying...
Checking the tightness of the cooling system Remove the radiator cap. Make sure the coolant level reaches the radiator filler neck. Pic. 2.196. Connecting a tester to check the radiator cap valve Connect a radiator...
Checking the Radiator Cap Valves Pic. 2.197. Special adapter for connecting the radiator cap to the tester Use a special adapter to connect the radiator cap to the tester (pic. 2.197). Increase the...
Checking the concentration of antifreeze Pic. 2.198. Measuring the specific gravity of the coolant with a hydrometer Measure the specific gravity of the coolant with a hydrometer (pic. 2.198). Measure the...
Compression test Before measuring compression, check the level and condition of the engine oil. Also, make sure the starter motor and battery are in good condition. Start the engine and...
Tightening the cylinder head bolts Pic. 2.200. Tightening the cylinder head bolts Loosen all bolts and tighten to rated torque (pic. 2.200). The moment of an inhaling of bolts of fastening of a head of...
Valve clearance adjustment This engine has hydraulic lash adjusters in the valve actuators, so there is no need to adjust the lashes. The correct operation of hydraulic compensators can be checked...
Attachment drive belts and tensioner Pic. 2.202. Attachment drive belt outline Put the belt on the tensioner pulley and install the tensioner on the engine. Pic. 2.203. Automatic tensioner If the tensioner...