Removing, checking and installing the timing belt Withdrawal Pic. 2.207. Engine cover Remove the engine cover (pic. 2.207). With a 16 mm wrench, turn the lever of the automatic accessory drive belt tensioner clockwise...
Removing the power unit supports Pic. 2.225. Power unit supports Attach the lifting device to the engine lifting hooks. Raise the engine until the load is removed from the power unit mounts. Removing...
Removing the engine and gearbox assembly Withdrawal Remove the battery. Pic. 2.230. air filter duct Disconnect the air filter duct (pic. 2.230). Disconnect the connectors listed below. Engine wiring harness...
Disassembly, inspection and assembly of camshafts Pic. 2.238. Camshaft components Disassembly Drain the coolant. Remove the engine cover and intake manifold. Disconnect the positive crankcase ventilation hose and...
Removal and repair of the cylinder head Pic. 2.249. Cylinder head, valves and valve springs Withdrawal Drain the coolant and disconnect the upper radiator hose. Disconnect the air ducts and crankcase...
Disassembly of the connecting rod and piston group Pic. 2.267. Piston and connecting rod Disassembly of the connecting rod cap Loosen the connecting rod cap bolts, then remove the connecting rod cap and lower connecting...
Disassembly, inspection and assembly of the crankshaft Pic. 2.280. Crankshaft and its components Disassembly Remove the timing belt, front cover, flywheel, cylinder head and oil pan. Parts removal procedures are given in the...