Engine cooling system 2.7 liters Hyundai Santa Fe 2
Cooling system tubes and hoses
Fig. 2.291. Cooling system components Examination Check the cooling system hoses and tubes for cracks, damage or deposits on their inner walls. Replace if necessary....
Fig. 2.291. Cooling system components Examination Check the cooling system hoses and tubes for cracks, damage or deposits on their inner walls. Replace if necessary....
Removal and installation the coolant temperature sensor
Removal Drain the coolant below the sensor installation level. Disconnect the battery and temperature sensor connector Fig. 2.293. Coolant temperature sensor Remove the...
Removal Drain the coolant below the sensor installation level. Disconnect the battery and temperature sensor connector Fig. 2.293. Coolant temperature sensor Remove the...
Removal, checking and installation the coolant pump
Fig. 2.294. Flow distribution diagram in the cooling system Fig. 2.295. Coolant pump components Fig. 2.296. Coolant pump diagram Removal Drain the coolant and disconnect...
Fig. 2.294. Flow distribution diagram in the cooling system Fig. 2.295. Coolant pump components Fig. 2.296. Coolant pump diagram Removal Drain the coolant and disconnect...
Removal, checking and installation the radiator
Fig. 2.298. Radiator components Removal Disconnect the battery. Disconnect the radiator fan motor connector. Remove the radiator drain plug and drain the coolant. Fig....
Fig. 2.298. Radiator components Removal Disconnect the battery. Disconnect the radiator fan motor connector. Remove the radiator drain plug and drain the coolant. Fig....
Removal, checking and installation the radiator fan motor
Fig. 2.301. Radiator fan motor components Removal Disconnect the battery. Disconnect the fan motor connectors and release the wires from the deflector clips. Models with...
Fig. 2.301. Radiator fan motor components Removal Disconnect the battery. Disconnect the fan motor connectors and release the wires from the deflector clips. Models with...
Checking the radiator cap
Fig. 2.307. Radiator cover of the cooling system Examination Fig. 2.308. Radiator cap parts to be checked Check the radiator cap for damage, cracks and deterioration...
Fig. 2.307. Radiator cover of the cooling system Examination Fig. 2.308. Radiator cap parts to be checked Check the radiator cap for damage, cracks and deterioration...
Removal, checking and installation the thermostat
Fig. 2.310. Thermostat components Removal Drain the coolant until its level is below the thermostat. Remove the cooling system inlet pipe and gasket. Remove the...
Fig. 2.310. Thermostat components Removal Drain the coolant until its level is below the thermostat. Remove the cooling system inlet pipe and gasket. Remove the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
We recommend other sections on the topic of Hyundai manuals:
Power unit: Cooling system Hyundai Accent 1 (1994-1999)
Power unit: Cooling system Hyundai Elantra 3 (2000-2006)
Power unit: Cooling system Hyundai Getz (2002-2011)
Power unit: Cooling system Hyundai Sonata 4 (2001-2012, petrol)
Power unit: Engine cooling system Hyundai Tucson 1 (2005-2010)
Power unit: Cooling and lubrication system Hyundai Matrix (2001-2010, petrol)
Link in different formats to this section
TextHTMLBB Code
- User manual
- Control devices
- Heating and ventilation
- Seat control
- Car driving
- Maintenance and care
- Vehicle Specifications
- Engine 2.0 and 2.4 liters
- Engine specifications
- Engine maintenance
- Engine repair
- Cooling system
- Intake and exhaust system
- Fuel system
- Engine 2.7 liter
- Engine maintenance
- Engine repair
- Cooling system
- Intake and exhaust system
- Transmission
- Transmission specifications
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Suspension and wheels
- Steering
- Brake system
- Body
- Exterior (external elements)
- Electrical equipment
- Equipment and devices
- Power devices
- Specifications