Fig. 2.301. Radiator fan motor components
Removal
Disconnect the battery.
Disconnect the fan motor connectors and release the wires from the deflector clips.
Models with automatic transmission: disconnect the automatic transmission fluid cooling hoses from the deflector.
Unscrew the four deflector mounting bolts.
Remove the deflector together with the electric motor.
Remove the retaining ring and remove the fan.
Fig. 2.302. Fastening the radiator fan
Unscrew the three screws securing the electric motor and remove the electric motor (Fig. 2.302).
Checking the radiator fan motor
Fig. 2.303. Checking the operation of the radiator fan
The original can be read on the resource www.hyundaibook.ru
Check that the radiator electric fan rotates when battery voltage is applied to the electric motor terminals (Fig. 2.303).
Check for extraneous noise in the operation of the electric motor
Checking the fan motor relay
Fig. 2.304. Location of the fan speed control relay
Remove the fan speed control relay from the relay box in the engine compartment (Fig. 2.304).
Fig. 2.305. Checking the closed circuit of the fan relay
Check for a closed circuit between terminals 2 and 4 of the relay. Check the relay circuits according to table 2.16.
Installation
Installation is carried out in the reverse order of removal.
Fig. 2.306. Fan and radiator assembly
Note: When installing, do not allow the fan to come into contact with the deflector. After installation, check the operation of the assembled unit (Fig. 2.306).