Withdrawal
1. Disconnect a wire from the negative plug of the storage battery.
2. Disconnect the connector from the radiator fan motor and the wiring harness from the shroud.
3. On vehicles with automatic transmission, disconnect the hoses from the oil cooler.
4. Turn out four bolts of fastening of a casing of the fan.
5. Remove the shroud along with the radiator fan motor.
6. Remove the clip and separate the fan from the fan motor.
7. Turn out three screws and remove the engine of the fan.
Checking the Radiator Fan Motor
1. Check that the radiator fan motor rotates when battery voltage is applied to it.
2. Check that there are no extraneous noises during engine operation.
Checking the Radiator Fan Motor Relay
1. From the fuse and relay box in the engine compartment, remove the radiator fan motor relay.
2. Using an ohmmeter, check the conductivity between the contacts «2» And «4».
Paragraph | Contact numbers | Conductivity |
1–3 | ||
ON | 1–3 | No |
OFF | 2–4 | Eat |
Installation
Installation is carried out in the reverse order of removal.
Attention! Make sure the radiator fan does not come into contact with the shroud after installation.