Fig. 2.194. Oil filter
Caution: Be careful not to burn yourself, as the engine oil is hot.
Using a special key, remove the engine oil filter.
Fig. 2.195. Applying engine oil to the filter gasket
Before installing a new filter on the engine, lubricate the filter gasket with a small amount of clean engine oil (Fig. 2.195).
Tighten the oil filter to the specified torque.
Oil filter tightening torque: 12–16 Nm.
Start the engine and check for engine oil leaks.
(The material is reprinted from another resource: «hyundaibook.ru»)
Turn off the engine and check the engine oil level. Add oil if necessary.