Gasoline engine power supply system Hyundai Tucson 1

Characteristics of the fuel system of gasoline engines (G4GC, G6BA)

Checking the fuel pressure in the system
1. Remove the rear seat cushion. 2. Open the special cover (A) under the seat cushion. 3. Disconnect the plug (B) from the fuel pump. 4. Start the engine and wait until...

Injector — checking the technical condition
1. Measure the resistance between the terminals of injectors No.1 and No.2. 2. If the resistance does not correspond to the above values, the injector must be replaced.

Fuel tank — removal and installation
1. Remove the front and main muffler assembly. 2. Remove the driveshaft assembly (all-wheel drive). 3. Remove the fuel tank cover. 4. Remove the clamps (A) from the fuel...

Fuel pump — removal and installation
1. Turn off the ignition and disconnect the negative terminal from the battery. 2. Remove the rear seat. 3. Remove the cover (A) of the fuel pump, disconnect the plug...

Tightening torques

Possible malfunctions and their causes

Special tools and accessories (petrol engine)

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Power unit: Fuel supply (1.5 l, injection) Hyundai Accent 1 (1994-1999)
Power unit: Fuel system Hyundai Elantra 2 (1995-2000, petrol)
Power unit: Fuel system Hyundai Getz (2002-2011)
Power unit: Fuel system Hyundai Sonata 3 (1993-1998)
Engine 2.0 and 2.4 liters: Fuel system Hyundai Santa Fe 2 (2007-2012, petrol)
Power unit: Power and exhaust system Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code