Car front and rear suspension Hyundai Tucson 1

Front suspension — removal
1. Remove the front wheels (A) from the hub (B). 2. Remove the brake hose bracket (B) from the stand (A) and unscrew the speed sensor cable mounting bolts (C). 3. Loosen...

Front suspension — disassembly
1. Remove the boot (A) from the strut. 2. Remove the lubricant from the insulator. 3. Using a special tool, compress the spring (A). 4. Loosen the self-locking nut (C)....

Front suspension — technical condition check
1. Check the insulator bearing for damage and breakage. 2. Check rubber parts for cracks or damage. 3. By moving the rod up/down, check the shock absorber for leaks of...

Front suspension — assembly
1. Install the spacer (D) so that the protrusions (A) fit into the holes (C) in the lower support (B) of the spring. 2. Using a special device, compress the spring....

Front suspension — installation
1. Install the strut assembly (B), then tighten the bolts (A) to the steering knuckle. Tightening torque 140-160 Nm. 2. Tighten the nuts (A) securing the rack....

Suspension arm — device

Suspension arm — removal and installation
1. Remove the front wheel. 2. Loosen the bolts (A) securing the ball joint. 3. Loosen the suspension arm mounting bolts (A), then remove the arm. 4. Installation is...

Suspension arm — replacement
1. Using a special tool, press out the silent blocks. 2. Apply lubricant to the mating surfaces. 3. Using a special tool, press new silent blocks into the lever.

Rear suspension — device

Rear suspension — removal
1. Loosen the mounting nuts (B) and remove the rear wheel (A). 2. Loosen the bolts (A) securing the speed sensor cable. 3. Loosen the mounting nut (B) of the anti-roll...

Rear suspension — disassembly and assembly
See section " Front suspension. Disassembly ".

Rear suspension — installation
1. Install the rack assembly (B) and tighten the rack mounting bolts (A). The tightening torque of the bolts is 140-160 Nm. 2. Tighten the upper nuts of the rack (A)....

Rear suspension arms — device

Removal and installation wishbones (rear wheel drive)
1. Loosen the bolts (A, B) securing the longitudinal and transverse arms. 2. Jack up the subframe (B), then unscrew the mounting bolts (A) and remove the subframe...

Removal and installation wishbones (all-wheel drive)
1. Remove the muffler (A). 2. Loosen the wishbone mounting bolts. 3. Disconnect the sensor plug (A) from the final drive. 4. Support the subframe (B) with a jack (A),...

Front wheel alignment
1. Place the car on a level surface. Set the wheels in the direction of straight-line movement. 2. Before checking and installing the steering wheels, make sure that the...

Tightening moments

Possible malfunctions and how to fix them

Special devices and tools

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Chassis: Car suspension Hyundai Accent 2 (1999-2005)
Chassis: Car suspension Hyundai Elantra 3 (2000-2006)
Chassis: Suspension and wheels Hyundai Getz (2002-2011)
Chassis: Suspension and wheels Hyundai Santa Fe 2 (2007-2012, petrol)
Chassis: Suspension and wheels Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code