Rear suspension — installation (Hyundai Tucson JM)

1. Install the rack assembly (B) and tighten the rack mounting bolts (A). The tightening torque of the bolts is 140-160 Nm.



2. Tighten the upper nuts of the rack (A). The tightening torque of the nuts is 30-41 Nm.



3. Tighten the nut (B) securing the anti-roll bar, then tighten the nut securing the speed sensor cable (A). The tightening torque of the anti-roll bar nut is 100-120 Nm, the cable nut is 7-11 Nm.



4. Install the rear wheel (A) and tighten the mounting nuts. Tightening torque 90-110 Nm.



The original can be found on the resource HYUNDAIBOOK