Contents: Checking the air conditioning system…⇓ Checking the condenser fan relay ⇓ Heater Fan Relay ⇓
Execution order
1. Disconnect the cable from the negative battery terminal.
2. Remove the relay box cover located in the engine compartment.
3. Remove the relay from the relay box.
4. Check the conductivity between the relay contacts.
Checking the air conditioning system relay
 |
 |
If the conductivity is different from the required value, replace the relay.
Checking the condenser fan relay
 |
 |
If the conductivity is different from the required value, replace the relay.
Heater Fan Relay
1. Disconnect the cable from the negative battery terminal.
2. Disconnect the connector from the heater fan switch.
3. Remove the relay and check the continuity between the relay contacts.
The full version is located on the website [www.hyundaibook.ru]
If the conductivity is different from the required value, replace the relay.