Oil capacity: 140–160 cm³
Oil condition
1. The oil should not contain moisture, dust, metal particles, etc.
2. Do not mix oils of different types.
3. The moisture content of oil increases if it is left exposed to air for a long time. After using the oil, the oil container should be sealed immediately.
It is necessary to check the oil level or add oil when the engine is running at idle speed and at high fan speed.
When replacing system components, make sure to add only the specified amount of oil.
Volume of oil to be added during replacement:
- Evaporator: 40 cm³
- Capacitor: 25 cm³
- Dryer/receiver: 40 cm³
- Compressor: 30 cm³
- Tubes: 15 cm³