Contents: Removal ⇓ Installation ⇓
Power steering mounting elements
Removal
Disconnect the ground cable from the battery.
Drain the fluid from the power steering hydraulic system.
Remove the cross beam.
Remove the intake pipe of the exhaust system.
Loosen the bolt securing the steering shaft and steering gear.
Loosen and remove the clamp.
Loosen the bolt securing the steering shaft and steering gear.
Loosen and remove the clamp.
Disconnect the low pressure hose and the high pressure hose.
After unscrewing two bolts, remove the steering rack mounting bracket.
Unscrew the two bolts and remove the steering gear housing mounting bracket.
Remove the steering gear assembly.
Remove the protective cover. Check rubber parts for wear and damage.
Installation
Installation is carried out in reverse order.