Mounting elements of the steering pump of late models
1 - bypass bolt;
2 - nipple;
3 - drive belt;
4 - pressure switch sensor connector;
5 - inlet hose;
6 - steering pump.
Removal
Drain the fluid from the power steering system.
Remove the drive belt (3) and inlet hose (5).
Disconnect the pressure switch connector (4).
After unscrewing the bypass bolt (1), remove the ring.
Disconnect the connection.
Late model years
Power steering pump components
1 - lid;
2 - gasket;
3 - rotor;
4 - blades;
5 - oil pump disc;
6 - spring;
7 - body;
8 - oil seal;
9 - shaft;
10 - bushing;
11 - retaining ring;
12 - pulley;
13 - branch pipe.
Remove the power steering pump (6).
Installation
Installation is carried out in reverse order, taking into account the following:
Fill the power steering system with fluid.
Bleed the air from the power steering system.