Adjusting the power steering and air conditioning pump drive belt (Hyundai Santa Fe CM)

Fig. 2.13. Adjusting the power steering pump and air conditioning drive belt

Loosen lock bolt "A".

Adjust the belt tension by turning the adjusting bolt "B".

Tighten lock bolt "A".

Check the belt tension. Repeat adjustment if necessary.

Note: Before rechecking the belt tensioner, rotate the engine crankshaft one revolution.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Santa Fe 2: Engine maintenance

Adjusting the alternator drive belt
Attachment drive belt tensioner
Adjusting the tension of the drive belts of mounted units
Compression check
Checking the concentration of antifreeze

We recommend other articles on the topic of Hyundai manuals:

Checking and adjusting the power steering pump drive belt Hyundai Accent 3 (2005-2010)
Checking the tension of the power steering pump drive belt Hyundai Elantra 3 (2000-2006)
Checking the tension of the power steering pump drive belt Hyundai Getz (2002-2011)
Checking the power steering belt tension Hyundai Sonata 3 (1993-1998)
Checking the tension of the power steering pump drive belt Hyundai Tucson 1 (2005-2010)
Checking the tension of the power steering pump drive belt Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet

Santa Fe 2 (2007-2012, petrol)