Warning: If the torque converter is installed on the engine first, the transmission-side oil seal may be damaged. Therefore, install the torque converter on the transmission first.
2. Install the transmission control cable and adjust it as follows:
- 1) Move the shift lever and transmission lock switch to the "N" (Neutral) position and install the control cable.
- 2) When connecting the control cable to the transmission mounting bracket, install the clamp so that it contacts the control cable (as shown in the figure.)
- 3) Use the adjusting nut to remove any play in the control cable, then check the smooth movement of the shift lever.
- 4) Check that the control cable is adjusted correctly.
