Contents: Removal ⇓ Installation ⇓
1. Cylinder head
2. Heat shield
3. Gasket
4. Exhaust manifold
Removal
1. Remove the engine cover.
2. Disconnect the front oxygen sensor connector.
3. Remove the front muffler with the downpipe.
4. Remove the exhaust manifold support (1) by unscrewing the screws (2 and 3). Tightening torque: 34-39 Nm (screw 2); 29-39 Nm (screw Z).
5. Remove the heat shield (4). Tightening torque of the nuts: 18-25 Nm.
6. Remove the exhaust manifold (5) with the catalytic converter. Tightening torque of the nuts: 18-25 Nm.
Installation
7. Installation is carried out in reverse order.