Removal and installation the crankcase ventilation valve (Hyundai Accent MC)

Contents: Removal ⇓ Examination ⇓ Installation ⇓

Removal

1. Remove the engine cover and disconnect the vacuum hose (B). Remove the valve (A) from the cylinder head cover.

Examination

2. Insert a thin rod (A) into the valve (B) from the threaded connection side and check the plunger movement. If the plunger does not move, clean or replace the valve.

Installation

3. Installation is carried out in reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Accent 3: Power and exhaust system

Checking the fuel vapor recovery system
Toxicity reduction system
Removal and installation the muffler
Removal and installation the exhaust manifold
Removal and installation the intake manifold

Checking the absorber purge valve
Checking the carbon absorber
Elements of the engine power supply system
Checking fuel pressure
Checking the fuel injector

We recommend other articles on the topic of Hyundai manuals:

Crankcase ventilation valve Hyundai Elantra 3 (2000-2006)
Crankcase Ventilation Valve (PCV) — Removal and Installation Hyundai Getz (2002-2011)
Forced crankcase ventilation system Hyundai Sonata 4 (2001-2012, petrol)
Removal, checking and installation the positive crankcase… Hyundai Santa Fe 2 (2007-2012, petrol)
Checking and adjusting valve clearances Hyundai Tucson 1 (2005-2010)
Forced crankcase ventilation system Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet