1. CD (CD Player Mode Select Button)
Insert the CD with the label facing up.
To start playing a CD while the stereo receiver is operating, insert a CD.
If there is a CD inside, even when the stereo receiver is on, pressing this button will start playing the CD.
The CD player operates when the ignition key is in the "ON" or "ACC" position.
2. ►►/◄◄ (Buttons to go to the beginning / end of the CD)
If you want to go to the beginning or end of the CD, press and hold the ►► (FF) or ◄◄ (REW) button.
When you release the button, the CD player will resume playback.
3. Buttons for going to the beginning of the recording ("track")
Using the record number ("tracks"), you can select the desired record on the CD being played.
Press the ►►| button once to skip to the beginning of the next entry. Press the |◄◄ button once to go to the beginning of the current entry.
4. SCAN (Button for searching the desired record ("track"))
Pressing this button will play the first 10 seconds of each recording ("track").
When the melody you want is playing, press the SCAN button again for 10 seconds, and then the recording you have selected will sound in full and from the very beginning.
5. RPT (Replay button)
You can listen to the same recording again by pressing the RPT repeat button. To cancel, press the button again.
(Information is copied from the website HyundaiBook)
If you do not disable this function, after the recording is finished, its playback will start again automatically. This process will repeat until you click this button again.
6. CD eject button
Pressing this button when a CD is in the CD player will eject the CD.
Note:
- To ensure proper operation of the audio equipment, maintain normal air temperature in the vehicle using the air conditioning and heating systems of the vehicle.
- When replacing a fuse, replace it with a fuse of the same rated current.
- When you disconnect the wires from the battery terminals, all stored station frequencies are erased. In this case, you need to install them again.
- Do not add lubricant to any rotating parts. Keep screwdrivers, magnets and other metal objects away from the tape transport and audio head.
- This equipment is designed for use only with a battery rated at 12VDC and negative ground.
- This is high-precision electrical equipment. Do not attempt to disassemble or adjust it.
- While driving, set the volume of the audio equipment so that you can hear outside sounds.
- Do not expose audio equipment to extreme humidity or water.