1. ON / VOL (Power switch)
Volume control knob, Left/Right stereo balance control knob, Scan switch. The radio operates when the ignition key is in the "ON" or "ACC" position. Turn the knob clockwise to turn on the power and increase the volume. The LCD display will show the frequency of the received radio station in the radio reception mode. To decrease the volume and turn off the radio, turn this knob counterclockwise.
BAL (Left/Right Stereo Balance Adjustment Knob)
Pull the knob and turn it clockwise to increase the volume of the right speaker. (The volume of the left speaker will decrease). Turning the knob counterclockwise will increase the volume of the left speaker. (The volume of the right speaker will decrease). After adjustment, push the knob back to its normal position to use its other functions.
SCAN (Automatic tuning knob for receiving stations)
When you press this knob, the frequency will increase and the receiver will tune in to the received stations one by one for 5 seconds. To stop automatic tuning, press this button again.
2. FAD (Front/Rear Stereo Balance Adjustment Knob)
Turn the knob counterclockwise to increase the volume of the front speakers. (The volume of the rear speakers will decrease). Turning the knob clockwise will increase the volume of the rear speakers. (The volume of the front speakers will decrease).
3. BASS (Low frequency tone control knob)
Push the knob to push it outwards, and turn it left or right to set the desired timbre in the low-frequency range.
TREBLE (High frequency tone control knob)
Pull the extended handle outward to the next locked position. Turn it left or right to set the desired tone in the high frequency range.
4. FM/AM (Range selection button)
Pressing the button switches between AM, FM1 and FM2 bands. The selected band is displayed on the LCD display.
5. TUNE (Manual frequency setting button)
Press the sides or this button to increase or decrease the frequency. If you hold this button for more than 1 second, the stop signal (stable radio station signal) will be ignored and the search for the next one will continue.
Automatic frequency adjustment
Press and hold the TUNE button for 1 second or longer. When you press the «» side, the radio will automatically tune to the next station with a stable signal and a higher broadcast frequency, and when you press the «» side, the radio will automatically tune to the next station with a lower broadcast frequency.
6. Station memory buttons
You can store six (6) stations in each of the AM, FM1 and FM2 bands into the memory of this radio.
Storing station frequencies
- You can store 6 AM stations and 12 FM stations in the audio system's memory. You can then select one of these stations by simply pressing the band selection button and one of the six station memory buttons. To store these stations in memory, follow these steps:
- Press the band selection button to select one of the AM, FM1 or FM2 bands.
- Select the station you want to store in memory using manual or automatic tuning.
- Select the station memory button to which you want to assign this station.
- Press and hold this station memory button for two seconds or more. The display will show an indicator with the number of the station memory button you have selected. After the frequency is stored in memory, its value will flash on the display. You must release the button and continue memorizing the next desired station. In total, you can program 18 stations, assigning one AM station and two FM stations to one button,
- Once programming is complete, you can turn on any of the programmed stations by selecting any of the AM, FM1 or FM2 bands and pressing the corresponding station frequency memory button.
The article is borrowed from the website (HyundaiBook.ru)