1. Power switch, Volume knob, Left/Right stereo balance knob, Scan switch; 2. Low frequency tone adjustment knob / High frequency tone adjustment knob; 3. Station memory buttons; 4. Liquid crystal display; 5. Frequency setting button; 6. Range selection button; 7. Front/rear stereo balance adjustment knob.
1. ON / VOL (POWER SWITCH. Volume control knob, Left/Right stereo balance control knob, Scan switch).
The radio operates when the ignition switch is in the "ON" or "ACC" position. Turn the knob clockwise to turn on the power and increase the volume. The LCD display will show the frequency of the radio station in the radio reception mode. Turn the knob counterclockwise to decrease the volume and turn off the radio.
BAL (Left/Right Stereo Balance Control). Pull the knob and turn it clockwise to increase the volume of the right speaker. Turning the knob counterclockwise will increase the volume of the left speaker.
SCAN (Automatic tuning button for received stations). When you press this button, the frequency will increase and the receiver will tune in 5 seconds to the received stations one by one. When the automatic tuning is finished, press this button again.
2. BASS / TREB (Tone control knob for low sound frequencies / Tone control knob for high sound frequencies). Push the knob to push it outwards, and turn it left or right to set the desired timbre in the low-frequency range.
Pull the outwardly extended knob to the following fixed position. Turn it left or right to set the desired timbre in the high frequency range. After adjustment, press the knob.
3. Station memory buttons (1-6). To listen to a radio station whose frequency is stored in memory, press these buttons for no more than two seconds. When you press the button for more than two seconds, the radio station to which the radio receiver was tuned is entered into memory. You can enter six (6) stations in each of the AM, FM1 and FM2 ranges into the memory of this radio receiver.
4. Liquid crystal display. The following information is displayed on the liquid crystal display; fM1/FM2/AM/(L)/(M) broadcast frequency, selected station number, ST stereo reception indicator for FM broadcast stations.
5. TUNE (Manual frequency tuning button). Press the sides or this button for no more than 1 second to increase or decrease the frequency.
SEEK (Automatic frequency adjustment). Press and hold the TUNE button for 1 second or longer. When you press the △ side, the radio will automatically tune to the next station with a stable signal and a higher broadcast frequency, and when you press the ▽ side, the radio will automatically tune to the next station with a lower broadcast frequency. If the selected broadcast station is already stored in memory, the number of the channel assigned to it will also appear on the display.
6. FM/AM (Band selection button). Pressing this button switches the FM/AM ranges in the following sequence:
Original version of the article on the website HyundaiBook
FM1 → FM2 → AM → FM1 (FM1 → FM2 → M → L → FM1: for Europe)
7. Fader (Front/rear stereo balance control knob). This knob is located at the top of the volume control knob. Turn the knob counterclockwise to increase the volume of the front speakers. Turning the knob clockwise will increase the volume of the rear speakers.