Contents: Disassembly ⇓ Assembly ⇓
Front Disc Brake Caliper Components (early models of the car)
1 - brake shoe;
2 - plate;
3 - bracket;
4 - finger;
5 - finger boot;
6 - bleed valve;
7 - support;
8 - sealing ring;
9 - piston;
10 - anther;
11 - bracket.
Front Disc Brake Caliper Components (late model cars)
1 - gasket;
2 - wear indicator;
3 - brake shoe;
4 - bolt;
5 - anther;
6 - bracket;
7 - bleed valve;
8 - support;
9 - finger;
10 - gasket;
11 - sealing ring;
12 - piston;
13 - anther.
Disassembly
Unscrew the two caliper mounting bolts.
Remove the caliper bracket.
After unscrewing the guide pin, remove the dust cover.
Remove the piston. To do this, place a wooden block between the piston and the outer part of the caliper body. To remove the dust boot and piston, direct compressed air into the brake hose opening.
Remove the piston dust boot.
Use your finger to remove the sealing ring.
Flush the piston and cylinder surfaces with brake fluid.
Check the removed components for wear and damage.
Assembly
Assembly is carried out in reverse order.