Execution order
1. Move the selector lever to position N.
2. Loosen the control lever lock nut where the cable and lever connect.
3. Move the control lever to position N.
4. Rotate the selector lever position indicator switch housing up to 12 mm and align the wide end of the control lever with the switch protrusion.
5. Tighten the switch mounting bolts to a torque of 10–12 N·m.
Warning: When turning the switch housing, be careful not to damage the O-ring.
6. Check that the selector lever is in position N.
7. Adjust the position of the nut so that there is no slack in the cable and the selector lever moves smoothly.
[Information is taken from a thematic website hyundaibook]
8. Take the vehicle on a test drive and ensure that the transmission is in the correct position for each selector lever position.