2. To turn away connecting bolts of the universal joint and to disconnect a steering shaft from the steering mechanism.
3. Raise the car on a lift.
4. Remove the front wheels.
5. Knock out the locking cotter pin of the nut and a puller (09568-34000) press out the ball joint pin of the tie rod end (A) from the swivel (IN).
6. Bleed the system.
7. Remove the engine crankcase protection (A).
8. Disconnect the front muffler (A).
9. Disconnect the feed tube (A) and outlet hose (IN) from the steering gear.
10. Remove clips (A) fixing the inlet tube and outlet hose.
11. Remove the power steering clamp.
12. Unscrew the fastening bolts (A) steering mechanism.
13. Remove the steering gear assembly with rods (A), by pulling it towards the right side of the vehicle.
Note. When removing the steering, be careful not to damage the anthers.