Contents: Removal ⇓ Installation ⇓
Automatic transmission controls (early models)
1 - control cable;
2 - solenoid locking unit;
3 - control lever;
4 - lever body;
5 - cable for switching on the reverse light;
6 - vehicle speed sensor cable;
7 - vehicle driving mode switch connector;
8 - housing of the driving mode selection lever;
9 - driving mode selection lever;
10 - Fork rod adjustment cam;
11 - switch button;
12 - gear shift lever handle.
Controls (late models)
1 - control cable;
2 - ignition lock cable;
3 - operating mode cable;
4 - body;
5 - lever for selecting driving modes;
6 - switch button;
7 - body (guide) shift lever;
8 - gear shift lever handle.
Removal
Remove the air filter and battery.
Disconnect the electrical connectors.
After unscrewing the nuts (arrows), disconnect the control cable.
Remove the upper lever housing.
Disconnect the control cable from the selector lever.
Loosen the flange mounting nuts and remove the control cable.
Loosen the bolts and remove the selector lever assembly.
Remove the automatic transmission mode selection switch handle and disconnect the wires (1, 2 and 3) from it.
Using a screwdriver blade as a lever, remove the full throttle position sensor (1) (not all models).
Installation
Installation is carried out in reverse order.
(Material was obtained from an official resource: www.HyundaiBook.ru)