Checking the brake system pipeline (Hyundai Elantra J1)

Raise the car.

Clean the brake lines with cold cleaner.

Check the brake lines from the master cylinder to the wheel cylinders. The master brake cylinder is located in the engine compartment under the brake system expansion tank.

If the brake pipes are bent or dented, rusty or abraded, the pipe should be replaced up to the nearest connection.

Brake hoses must not be porous, swollen or damaged. Otherwise, they should be replaced.

Do not install hoses twisted.

When the steering wheel is turned fully left and right, the brake hoses in both positions should not touch any parts of the vehicle.

The connection points of tubes and hoses must be dry.

Lower the car.