Installing the front wheels (Hyundai Accent X3)

Place the vehicle on a level surface with the wheels in a straight position.

Wheel alignment

Toe-in (B-A or angle) is adjusted by turning the cross-tie rod clamps.

• Convergence (B-A) mm (standard value) - ±3 mm
• Tightening torque of connecting rod nuts: 50-55 Nm

Front wheel camber angle

The steering knuckle is pre-adjusted to a specific front camber angle at the factory and does not require any adjustment.

• Wheel alignment (standard value) - 0°+30

Angle of longitudinal inclination of kingpin

The steering knuckle is pre-adjusted at the factory and does not require adjustment.

• Front wheel camber (standard value) — 2°±30

[Original version of the article on the website: HyundaiBook]