Shock absorber - Hydraulic, double-acting
- Maximum length - 470 mm
- Collapsed length - 319 mm
- Travel - 151 mm
The rod of the stabilizer bar:
- Length (distance between centers) - 980 mm
- Outer diameter - 17.3 mm
Tires:
- 155/80 R 13
- 175/70 R 13
Internal tire pressure, kPa - 205
Wheels:
- 5Jx13 (with disc steel, aluminum)
- 4.5Jx13) (with steel disc)
Standard value:
- Toe-in of front wheels — +3 mm
- Front wheel camber — 0°±30
- Longitudinal inclination of the kingpin — 2°±30
Wheel runout:
- Radial, mm - 0.7 (steel disc); Average of left and right 0.3 (aluminum disc)
- Axial, mm - 1.0 (steel disc); 0.3 (aluminum disc)
Tightening torques, Nm
- Upper rack nut - 20-30
- Rack assembly / knuckle - 90-105
- Self-locking strut nut - 60-70
- Lower arm ball joint/knuckle - 60-72
- Lower Arm Bracket/Lower Arm - 95-120
- Lower Arm/Lower Arm Bracket Bolt - 60-80
- Bolt of fastening of the lower / upper bracket of the stabilizer bar - 17-26
- Ball joint at the end of the tie rod/knuckle - 15-34
Recommended lubricant
Front wheel bearing | SAE J310A Multipurpose grease NGLI-2 or equivalent |
Lower arm ball joint | Grease Valiant R-2 or POLYLUB GLY 801K |
Flock Insulator Bearing | SAE J310A Grease (NLGI #0 or equivalent) |
Inner surface and flange of ball joint boot | Sunlight MV-2 |