Contents: Removal ⇓ Installation ⇓
Removal
Caution: After disconnecting the battery terminal, wait at least 3 minutes.
1. Disconnect the wire from the negative terminal of the battery.
2. Remove the glove box.
3. Disconnect the passenger airbag connector and loosen the screws (arrows). Tightening torque: 8-9 Nm.
4. Remove the instrument panel.
5. Loosen the nuts and remove the passenger airbag from the instrument panel. Tightening torque: 2-3 Nm.
Installation
6. Installation is carried out in the reverse order of removal.