Order of execution
1. Disconnect high voltage wires from spark plugs and ignition coils. Clean and check insulation integrity of high voltage wires. Check the inner surfaces of the contacts of high voltage wires for corrosion or deposits.
2. Measure the resistance of the high voltage wires with an ohmmeter.
High Voltage SOHC Engine Wires | ||||
Cylinder | №1 | №2 | №3 | №4 |
Length, mm | 605 | 545 | 450 | 370 |
Resistance (BOUGI), Ohm | 2,71-4,07 | 2,44-3,66 | 2,02-3,02 | 1,66-2,49 |
Resistance (R16AIPS), Ohm | 6,05-12,71 | 5,45-11,45 | 4,50-9,45 | 3,70-7,77 |
VOHC motor high voltage wires | ||||
Cylinder | №1 | №2 | №3 | №4 |
Length, mm | 560 | 440 | 360 | 310 |
Resistance (BOUGI), Ohm | 2.51-3.76 | 1.97-2.96 | 1.61-2.42 | 1.39-2.08 |
Resistance (R16AIPS), Ohm | 5.60-11.76 | 4.40-9.24 | 3.60-7.56 | 3.10-6.51 |
Warning! The resistance of the high voltage wire must not exceed 10,000 ohms, otherwise replace the wire.