1 – front cover; 2 – front hub; 3 – lid; 4 – bolt; 5 – traction relay solenoid; 6 – plunger; 7 – spring; 8 – gasket; 9 – lever; 10 – holders; 11 – spring; 12 – plug; 13 – washer; 14 – thrust ring; 15 – stopper; 16 – overrunning clutch; 17 – rotor; 18 – washers; 19 – stator; 20 – brush holder; 21 – back cover; 22 – rear hub; 23 – bolt; 24 – screw.
Starter fastening elements
1 – bolt, 9.8–16 Nm; 2 – starter; 3 – bolt, 26–33 Nm.
Removal and installation
1. Disconnect the cable from the negative battery terminal.
2. Disconnect the speedometer drive cable.
3. Disconnect the connector from the starter and the wire from the terminal.
4. Remove the bolts and remove the starter.
5. Installation is carried out in the reverse order of removal.