Replacing the rear trailing arm bushing of the rear suspension (Hyundai Accent LC)

Execution order

1. Install the special tool on the rear suspension trailing arm.

2. Press out the bushing.

3. Lubricate the bushing and the bushing mounting location on the lever with soapy water.

3. Lubricate the bushing and the bushing mounting location on the lever with…

4. Place the bushing on the lever as shown in the figure.

5. Using special tool 09551–25000, press the bushing into the lever.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Accent 2: Car suspension

Rear suspension strut
Front cross stabilizer
Replacing the bushing (G) of the lower arm
Replacing the lower arm bushing
Lower control arm of the front suspension

Replacing the rear wishbone bushing (A and B) of the rear suspension
Rear stabilizer bar
Front wheel alignment angles
Rear wheel alignment adjustment
Tire wear

We recommend other articles on the topic of Hyundai manuals:

Rear suspension trailing arms Hyundai Elantra 3 (2000-2006)
Rear suspension strut Hyundai Getz (2002-2011)
Rear Suspension Specifications and Lubricants Hyundai Sonata 3 (1993-1998)
Rear suspension trailing arm Hyundai Santa Fe 2 (2007-2012, petrol)
Rear suspension trailing arm Hyundai Tucson 2 (2009-2015)
Removal and checking the rear suspension trailing arm Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet