Front suspension | ||
Type | MacPherson coil spring | |
Wire diameter x diameter x height of coil spring, mm | 12.3x140x305/314.9 | |
Identification color | 12.3x140x305/314.9 | |
shock absorber | ||
Type | Hydraulic | |
Stroke, mm | 161 | |
Damping force at 0.3 m/s | Expansion, N | 470±100 |
Compression, N | 540±70 | |
Tire size | 155/80 R13, 175/70 R13, 185/60 HR14 | |
Disc diameter, mm | 4,5JX13, 5Jx13, 5Jx14 | |
Tire inflation pressure, kPa | 210 | |
Rear suspension | ||
Wire diameter x diameter x height of coil spring, mm | 12.0x95.0x150.0 | |
Spring height in free state, mm | 344 | |
Identification color | Yellow–1 line | |
shock absorber | ||
Type | Hydraulic | |
Stroke, mm | 211 | |
Damping force at 0.3 m/s | Expansion, N | 390±100 |
Compression, N | 330±70 |
Wheel alignment
Name | Front wheels | rear wheels |
Convergence, mm | 0±3 | 3±2 |
collapse | 0°±30' | –41°±30' |
Pitch Angle | 1°48'±30' | |
Pivot Angle | 11°03'±30' | |
Pivot displacement, mm | 5,8 |
Wheels
Wheel runout | Steel discs | aluminum rims |
Radial, mm | 0,6 | 0,3 |
Axial, mm | 1,0 | 0,3 |
Tightening torques, Nm
Nuts of fastening of a power shaft | 220–250 |
Upper front strut nuts | 20–30 |
Rack to hinge | 75–90 |
Self-locking strut nuts | 60–70 |
Lower arm ball joint to pivot | 60–72 |
Bracket for lower arm | 95–120 |
Lower Arm Bracket Bolt | 95–120 |
Bolt of fastening of an arm of the stabilizer of cross stability | 17–26 |
Tie Rod End Ball Joint | 15–34 |
Nuts of fastening of draft of the stabilizer | 35–45 |
Rear Support Bolt to Bottom Frame | 30–40 |
Nut of fastening of a back support | 45–60 |
Rear strut top nut | 20–30 |
Rear strut lower nut | 75–90 |
Rear strut self-locking nut | 45–50 |
Rear stabilizer link to anti-roll bar | 35–45 |
Bolt of fastening of an arm of the back stabilizer of cross-section stability | 17–26 |
Rear suspension arm to axle carrier | 130–150 |
Rear suspension arm (A) to the body | 100–120 |
Rear suspension arm (IN) to the body | 80–100 |
Nut of fastening of the rear arm to the fastening element of the axle | 130–150 |
Nut of fastening of the rear arm to the bracket | 100–120 |
Rear arm to body | 40–50 |
Lubricants
Lower arm ball joint | Lubricant R-2 | as required |
Strut bearing | Lubricant SAE J310a, NLGI No. 1 | as required |