A. Front seat.
B. Floor console.
C. Instrument panel.
D. Crossbar cover.
2. Disconnect the fan connectors (A).
 |
 |
3. Disconnect the connectors.
4. Disconnect the airbag connector (A) and antenna connector (B).
5. Press the locking pin, then disconnect the wiring connectors on the driver's side.
6. Remove the wiring cover (A) using a screwdriver.
7. Press the locking pin, then disconnect the wiring connectors on the passenger side.
8. Remove the wiring cover (A) using a screwdriver.
9. Disconnect the connector fastening clip (A).
From the driver's side
From the passenger side
10. Loosen the mounting bolts.
11. Loosen the bolts and loosen the nuts, then remove the cross member (A).
12. Installation is carried out in reverse order.
Note: Make sure the connectors are connected correctly. Wear gloves to protect your hands from injury.