Replacing the glove box (Hyundai Tucson LM)

1. Remove the side cover (A) of the instrument panel using a screwdriver or a special puller.



2. Disconnect the guide (B) from the glove box (A).



3. Disconnect the lifting mechanism (B) from the glove box (A).



4. Disconnect the pin (A) and remove the glove box (B).



5. Loosen the mounting screws and remove the instrument panel section (A) from the passenger side.





6. Loosen the mounting screws and bolts and remove the glove box housing (A).



7. Disconnect the lamp connector (B).



8. Installation is carried out in reverse order.

(Material was obtained from an official resource: «HYUNDAIBOOK.RU»)