Note: To avoid damaging the lining when using a flat-blade screwdriver as a lever, wrap the screwdriver with insulating tape. Also tape adjacent parts that require protection. Wear gloves to protect your hands from injury.
1. Remove the instrument cluster trim panel (A) using a screwdriver or a special puller.
2. Remove the lower panel (A) of the instrument cluster trim using a screwdriver or a special puller.
3. Loosen the mounting screws and remove the instrument cluster (A).
4. Disconnect the connectors (B).
5. Installation is carried out in reverse order.
Note:
- Make sure the connectors are connected correctly.
- Replace any damaged fasteners.