Removal and installation the compressor (Hyundai Tucson JM)

1. Loosen the tensioner pulley and remove the drive belt.

2. Release the refrigerant from the system.

3. Disconnect hoses A and B from the compressor.

4. Remove the compressor.

5. Installation is carried out in the reverse order of removal.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Tucson 1: Air conditioning and heater

Electromagnetic clutch
Air conditioning system piping
Air conditioning system diagnostics
Checking the tightness of the system
Checking and restoring the compressor oil level
Filling the compressor with oil

Disassembling the compressor
Installing the compressor bushing and pulley
Compressor fuse box
Checking the technical condition of the condenser
Replacing the capacitor
Heater — device

We recommend other articles on the topic of Hyundai manuals:

Checking and adjusting the compressor drive belt Hyundai Accent 3 (2005-2010)
Air conditioning compressor Hyundai Elantra 1 (1990-1995, petrol)
Air Conditioning Compressor Lubricant Oil Hyundai Getz (2002-2011)
Procedure for returning compressor oil to the compressor Hyundai Sonata 4 (2001-2012, petrol)
Removal and installation the clutch hub and compressor pulley Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet