Removal
1. Remove the cotter pin, washer and pin with head and hole for the cotter pin.
2. Remove the clutch pedal mounting bolt.
Examination
1. Check the pedal arm and bushing for wear.
The article is borrowed from an online resource: www.hyundaibook.ru
2. Check the clutch pedal for bending or deformation.
3. Check the return spring for damage and loss of elasticity.
4. Check the clutch pedal cushion for damage and wear.
5. Check the conductivity between the ignition lock switch contacts.
Installation
1. Install the parts in the reverse order of removal.
2. Before installation, lubricate the bushing, pin, washer and pin with head and hole for the cotter pin.
3. Install the push rod onto the clutch pedal.
4. Adjust the length of the pusher.