Order of execution
Warning! If the belt is loose, it will make abnormal noise during operation and will be subject to premature wear. If the belt is too tight, the water pump or alternator bearings may be damaged.
1. Loosen the nut «A» alternator mounts and bolt «B» fixing the tension bolt.
2. Turn the adjusting bolt to adjust the belt tension.
3. Tighten the bolt «B» fixing the tension bolt.
4. Tighten nuts «A» generator mounts.
5. Check the belt tension and, if necessary, repeat the adjustment. Tightening torque Nuts «A» alternator mounts: 20–25 Nm Bolt «B» fixing the tension adjustment bolt: 12–25 Nm.