Withdrawal
1. Remove the sleeve and tip of the inner part of the cable from the accelerator pedal lever.
2. Disconnect the connector from the accelerator pedal switch, remove the bolts and remove the accelerator pedal bracket.
Examination
1. Check the accelerator cable and cable sheath for damage.
2. Check up smoothness of movement of a cable of an accelerator in a cover.
3. Check up an accelerator pedal on absence of a bend.
4. Check the condition of the return spring.
5. Check up a condition of a tip of a cable of an accelerator.
6. Check up functioning of the switch of a pedal of an accelerator.
Installation
1. Lubricate the accelerator pedal pivot points with grease.
2. To prevent vapors and exhaust gases from entering the vehicle interior, apply sealant to the threads of the accelerator pedal bracket mounting bolts. Tightening torque: 8–12 Nm
3. Insert the end of the accelerator cable into the grip at the end of the accelerator pedal lever.
4. Apply multipurpose grease around the end of the throttle cable.