Withdrawal
Warning! The throttle body must not be removed Remove the throttle position sensor.
Attention! Remove the throttle position sensor only to replace it.
Examination
1. Check the throttle assembly for cracks.
2. Check the cleanliness of the vacuum channels.
3. Check the play of the accelerator cable.
1. The throttle set screw has been adjusted in line with an air volume of 0.516±5%g/s, so it is not recommended to adjust it yourself.
2. If the idle speed does not match the required one, first of all, check the corresponding sensors.
3. It is not required to clean carbon deposits in the throttle assembly, since it does not affect the performance of the fuel system at all.