Connect the tester to the diagnostic socket.
Insert probe (2) 0.5 mm thick between the accelerator lever (1) and throttle lever (3) to a depth of 3 mm.
Turn the ignition key to the ON position (ON), but do not start the engine.
After loosening the accelerator pedal position sensor mounting bolts, turn the sensor clockwise until it stops. In this position, the throttle closed position switch must be turned on.
Slowly turning the sensor (1) counterclockwise, find the position where the sensor turns off. After that, securely tighten the sensor mounting bolts.
Select the appropriate mode on the tester.
Check the output voltage value of the accelerator pedal position sensor (400-1000 mV).
In case of voltage deviations from the nominal value, check the accelerator pedal position sensor.
Remove the dipstick and turn the ignition key to the OFF position (OFF), disconnect the tester.