Withdrawal
1. Disconnect a wire from the negative plug of joint stock bank.
2. Remove the bottom panel from the driver's side.
3. Remove the screw, disconnect the connector and remove the ignition switch (1).
4. Remove the steering column.
5. Remove the screw, disconnect the connector and remove the ignition switch (2).
6. Turn the ignition key to position «ACC», use a screwdriver to depress the locking pin and remove the ignition lock cylinder (3).
Installation
7. Installation is carried out in the reverse order of removal.
Examination
8. Check up circuit closure between contacts of a socket at various positions of a key in the ignition lock.