Withdrawal
1. Disconnect a wire from the negative plug of joint stock bank.
2. Remove the front bumper.
3. Disconnect the hose and connector from the pump (A). Loosen the three screws and remove the pump.
Installation
4. Installation is carried out in the reverse order of removal.
Examination
5. Fill the washer reservoir with water.
6. Connect «+» And «-» battery to pins 2 and 1 of the connector, respectively. Check the operation of the pump and the spraying of water on the windshield.
A. Windshield washer
1. «Weight»
2. Nutrition
B. Windscreen and rear window washer
1. «Weight»
2. Windshield washer (nutrition)
3. Rear window washer (nutrition)
7. Connect «+» And «-» battery to pins 3 and 1 of the connector, respectively. Check the operation of the pump and the spraying of water on the rear window.